| Model |
LY71 |
| Specifications by application |
- |
| Number of input shafts |
1 or 2 axes (2-axis add function available; addition only is displayed when adding) |
| Display |
7 digits and minus display, Color amber |
| Display data |
Current (1st axis, 2nd axis, addition axis), maximum, minimum and peak-to-peak values |
| Input resolution |
- Standard : 0.1 μm, 0.5 μm, 1 μm, 5 μm, 10 μm, 1 s, 10 s, 1 min, 10 min
- Expanded : 100 μm, 50 μm, 25 μm, 20 μm, 2 μm, 0.05 μm, and 1 degree can be added.
|
| Display resolution |
Measuring unit input resolution or higher and supported inch units |
| Input signal |
A/B quadrature signal, Z signal (Conforms to EIA-422) |
| Alarm display |
Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data |
| Reset |
Current value reset, Alarm cancel |
| Restart |
Restart of peak value calculation for each axis/all axes |
| Preset |
It is possible to store/edit up to three values for each axis. |
| Master calibration function |
The master calibration value is relocated when going past the reference point after the power is turned on. |
| Reference point operations |
It is possible to store/edit one value for each axis (when not using the master calibration function). |
| Hold function |
- Selectable from latch and pause
- Latch : Display held while latched (Display hold)
- Pause : Peak calculation stopped while paused (Peak calculation hold)
|
| Linear compensation |
A fixed compensation amount is applied to the measuring unit's count value. Compensation amount Standard: ±600 μm/m (Expanded: ±1000 μm/m) |
| Scaling |
0.100000～9.999999 |
| I/O |
- Expansion board for BCD(option:LZ71-B), available 1 or 2 pics.
- Expansion board for comparator(option:LZ71-B)
|
| Power supply |
DC 12 V Rating 0.75 A Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22 (For U.S. only) or PSC-23 (For Europe and other countries) *Option |
| Power consumption |
MAX. 32 VA connected at the AC adaptor. |
| Temperature |
Operating : 0～40℃(non condensing) Storage : -20～60℃(non condensing) |
| Mass |
Approx. 1.5kg |
