DIGITALGAGE MG40 (MAGNESCALE)
DIGITALGAGE
  

Features

MG40 series, new measurement system integrates the primary functions of a counter into the gauge itself to a high degree. The MG40 series does not have to count analog outputs or AB phase outputs of the gauge and acquires positional information directly via full digital communication. The theoretical response speed is 20 times faster than the response speed of our previous models. Miscounts, caused by external noise, are eliminated and the system is capable of instantly recovering from a communication error by way of re-reads.

  • Ethernet and CC-Link models are available
  • High-speed and highly reliable communication shortens cycle times
    • High-speed communication via Ethernet
    • Communication error detection
    • High-speed RISC processor dedicated to communication
    • Our proprietary high-speed processor for multi-axis data processing
    • Newly developed ASIC
  • Quick and simple wiring connections
    • Connection via a hub
    • PLC connections
    • Acquiring individual gauge information
    • DIN rail mount and frontal connections
  • Maximized system efficiency
    • On the path to a revolution in quality
    • High-speed measurements enable shorter cycle time
    • Lower overall system costs
  • Specifications

    Specifications
    Item Conditions Description Remarks
    This product might change without a previous notice for the improvement, confirm the function and the performance with the latest specifications.
    No. of connectable measuring units Entire system 1 to 100 units (Connection disabled aft er connection of 101st unit.) Up to 24 connected MG42 hub units
    MG41main unit 0~4units
    MG42hub unit 0~4units
    Connectable measuring units DK800A/DK800B series, DK10, DK25, DK50, DK100, DK110, DK155, DK205
    Connection cable length Between MG41 main unit and MG42 hub unit
    Total cable length from MG41 main unit: Maximum 30 m(Maximum current: 4 A or less)
    Resolution Settable output data resolution and display resolution
    Measuring unitsResolution(Input resolution) 0.1μm 0.1μm 0.5μm 1μm 5μm 10μm
    0.5μm - 0.5μm 1μm 5μm 10μm
    Measuring unit data import capacity data transfer10Mbps Maximum 10 The data for one axis is counted as one data.
    Peak hold function Calculation of maximum value
    Peak value is not updated during pause.
    Output and display data are not updated during latching (internal data is updated)
    Recalculation of peak value is started by start function.
    Output data Single axis Current value
    Addition and subtraction Current value Single axis calculation of an addition / subtraction axis is not possible(for preventing inconsistencies in calculation).
    Conparetor function Data for each axis (single axis
    Comparator setting values 2values 4values 8values 16values
    No. of setting value groups 16groups 8groups 4groups 2groups
    Ethernet 100Base-T (compliant with IEEE 802.3) 100 Mbps/10 Mbps/1 Mpbs (Auto-negotiation) Command input
    Reset function Current value for each axis is reset (by command).
    Preset function Value is preset to the current value of each axis (by command).
    Datum point setting function Datum point of each axis can be set (by command). When master calibration function is not used
    Reference point function Reference point can be used to relocate the datum point of each axis (by command).
    Master calibration function Reference point can be used to perform master calibration for each axis (by command).
    Measuring unit product information The product information of the connected measuring unit can be acquired.
    Command/setting enabled or disabled for each communication line Ethernet CC-Link
    Command Reset function
    Preset function
    Datum point setting function When master calibration function is not used
    Reference point function
    Master calibration function
    Comparator value setting
    Comparator group number setting
    Start
    Pause
    Latch
    Data output Current value・Peak value( All axis) ×
    Current value・Peak value( each unit)
    Comparator result
    Alarm( data transfer・Measuring units)
    Soft ware version
    Measuring unit product information
    Comparator result Input resolution
    Display・Resolution
    Axis addition
    Comparator mode (2, 4, 8, or 16 values in 1 group)
    Power supplyPower supply voltage Terminal input DC12~24V(11~26.4V) Use a power supply with a current that is 4 A or higher. (Recommended: +24 V) (for every six MG42 hub units)
    Power consumption Note the connection conditions. System total: Max. current 4A
    When the maximum current is exceeded
    MG41 main unit : 4 W
    Operating temperature/humidity 0~+50℃(non condensing)
    Storage temperature/humidity -10~+60℃(20~90%RH)
    Mass MG41:300g MG42:250g

     
     

    
    제조사
                  
                  
    게시물 607건
     CST (COZY)
    인장 압축형  S 타입 로드셀
     TML 로드셀 카다…
    TML 카다로그. 
     NTS 로드셀 카다…
    NTS 로드셀 카다로그
     TML 로드셀 목록…
    TML 로드셀목록
    www.tml.jp
     SHOWA LOADCELL LIST
    SHOWA 로드셀 목록입니다.
    http://www.showa-sokki.co.jp/products/load_cell.html
     일본 NTS 로드셀
    NTS 로드셀 목록첨부합니다.
     ARK-A TML
    소형액 응답 가속도계 ARK-A 1000m/s 2~2000m/s 2
     ARJ-A-T TML
    소형액 응답 3축 가속도계 ARJ-A-T
    50m/s 2~2000m/s 2
     ARJ-A-D TML
    소형액 응답 2축 가속도계 ARJ-A-D(수주 생산품)50m/s 2~2000m/s 2
     ARJ-A TML
    소형액 응답 가속도계 ARJ-A 50m/s 2~2000m/s 2
     ARE-A-T TML
    소형 고용량 3축 가속도계 ARE-A-T
    1000m/s 2~5000m/s 2
     ARE-A TML
    소형 고용량 가속도계 ARE-A 1000m/s 2~10000m/s 2
     ARH-A TML
    방수형 저용량 가속도계 ARH-A 10m/s 2~500m/s 2
     ARF-A-T TML
    소형 저용량 3축 가속도계 ARF-A-T 20m/s 2~500m/s 2
     ARF-A TML
    소형 저용량 가속도계 ARF-A 10m/s 2~500m/s 2
     ARM-A-T TML

    소형 3축 가속도계 ARM-A-T 100m/s 2~400m/s 2

     1  2  3  4  5  6  7  8  9  10