|
|
DIGITALGAGE DF812S/MF10 (MAGNESCALE)
|
|
DF812S Features
Slim, compact, and having a high resolution of 0.1 μm maximum The maximum response speed has also further advanced.
- Measuring range: 12 mm
- Accuracy: 1 μm
- Maximum resolution: 0.1 μm
- Maximum response speed: 80 m/min
- Built-in reference point
- Excellent resistance to water and oil
- Adopts a flexing-resistance cable
MF10 Features
Simple settings make operating easy. Threshold can be set by two clicks.
- Input/output circuit: NPN output(Current sink) / PNP output(Current source)
- Number of Go/NoGo judgment outputs: 2
- External input: 1
- Minimum display unit: 0.1μm
- Power supply voltage: 10 to 30VDC, including ripple(p-p) 10%
- Protection circuit: Power supply reverse polarity protection, output short-circuit protection, and output incorrect connection protection
- Number of banks: 4
Specifications
DF812S series Specifications |
Model |
DF812SR、DF812SFR |
DF812SLR、DF812SFLR |
Measuring range |
12mm |
Resolution |
0.1μm |
Accuracy (at 20°C/68°F) |
1μm |
Measuring force(at 20℃/68°F) |
Upward : 0.4±0.3N |
Horizontal : 0.5±0.3N |
Downward : 0.6±0.3N |
Maximum response speed |
80m/min |
Reference point |
at 1±0.5 mm position of spindle movement |
Reference point response speed |
80m/min |
Output |
Dedicated serial communication protocol |
Spindle driving |
Spring push |
Achieved number of strokes |
60 million strokes (under specific test conditions defined by Magnescale Co., Ltd.) |
Protective structure |
IP66 |
IP54 When a Φ4 mm tube is connected : IP67 |
Impact resistance |
100m/s2(20~2,000Hz) |
Vibration resistance |
1,000m/s2(11ms) |
Operating temperature |
0~55℃ |
Storage temperature |
-20~60℃ |
Power supply voltage |
+10 to +30V DC including ripple (p-p) 10% |
Power consumption |
1.2 W or less |
Mass |
Approx. 30 g (not including cable parts and interpolation box) |
Probe part cable length |
2m |
Output cable length |
Max. 20 m (Use the optional CE34.) |
Feeler |
Provided with a carbide ball tip Mount screw M2.5 |
Accessories |
Instruction Manual, 1 wrench, 1 hose elbow (only DF8**S*L**) Tightening nut, clamp wrench, wave washer, stop pin (1 each) (only DF8**S*F**) |
MF10 series Specifications |
Model |
MF10-P1 |
MF10-P2 |
Type |
I/O circuit |
NPN output (current sink) |
PNP output (current source) |
I/O |
Number of Go/NoGo judgment outputs |
2 |
Number of external inputs |
1 |
Minimum display unit |
0.1μm |
Power supply voltage |
+10 to +30V DC including ripple (p-p) 10% |
Power consumption*1 |
Power supply voltage 24 V normal mode: 2040 mW or less (Power consumption 85 mA or less) Power-saving ECO mode: 1920 mW or less(Current consumption 80 mA or less) |
Go/NoGo judgment output*2 |
Load voltage: DC 30 V or less, open collector output type Load current: the total of the two outputs must be 100 mA or less Residual voltage and load current less than 10 mA: 1 V or less Load current 10 mA to 100 mA: 2 V or less Off-state current: 0.1 mA or less |
Protection circuit |
Power supply reverse connection protection, output short-circuit protection and output reverse connection protection |
Number of banks |
4 (Can be set 4 kinds of judgment value) |
Ambient temperature range*3 |
Operating: When lining up 1 or 2 digital tolerance indicators: 0°C to +55°C Storage: -10°C to +60°C (with no icing or condensation) |
Ambient humidity range |
Operating and storage: 35% to 85% RH (with no condensation) |
Mass (main unit) |
Approx. 75 g |
Cable length |
2m |
*1. At a power supply voltage of 10 to 30 V, Normal mode: 2250 mW or less (power supply voltage 30 V: power consumption 75 mA or less / power supply voltage 10 V: power consumption 155 mA or less), power-saving ECO mode: 2100 mW or less (power supply voltage 30 V: power consumption 70 mA or less / power supply voltage 10 V: power consumption 135 mA or less) *2. When lining up 4 or more digital tolerance indicators, the 2 output total is 20 mA or less. *3 When used in a row, the operating ambient temperature range is 0°C to +50°C for 3 to 10 units, 0°C to +45°C for 11 to 16 units, and 0°C to +40°C for 17 to 30 units. |
|
|
|